The formulas
Used margin = position value ÷ leverage. Margin level = equity ÷ used margin × 100%. Equity is balance plus floating profit or loss. See leverage and margin for the basics.
Brokers disagree on thresholds. A margin call (a warning) is often set near 100%, and stop-out (positions closed automatically) at a lower figure such as 50%, but the numbers, the order positions are closed in, and whether the level is checked on equity or balance depend on the broker and account type. Retail rules in some regions also set a mandatory close-out. Read your broker's terms; do not assume.
Worked example (E, invented inputs)
Balance $5,000, long 1 lot EUR/USD at 1.1000, leverage 1:30. Position value = 100,000 × 1.1000 = $110,000; used margin = $110,000 ÷ 30 = $3,666.67. Starting margin level = 5,000 ÷ 3,666.67 = 136.4%.
| Margin level reached | Equity | Floating loss from the start | EUR/USD move against a long (USD 10 per pip per lot) |
|---|---|---|---|
| 100% | $3,666.67 | $1,333.33 | 133.3 pips |
| 80% | $2,933.33 | $2,066.67 | 206.7 pips |
| 50% | $1,833.33 | $3,166.67 | 316.7 pips |
The margin level falls as the floating loss grows, because equity falls while used margin stays put. Using less leverage for the same balance, or a smaller position, lowers used margin and moves every row further away. Note the stop-out distance here is the account's limit, not a sensible stop: the stop you plan should be far closer, set from the setup and the risk (see position size).
Using it
- Find your broker's margin-call and stop-out levels in its account terms.
- Work out used margin with the lot size calculator, then check the distance to the stop-out level as above.
- Keep that distance much larger than your planned stop; if it is not, the position is too large for the account.
Leveraged trading can lose more than the deposit with some products. This page is education, not advice.
Try it with your own numbers
Free calculators that do the math for you. No signup, and nothing leaves your browser.
Pre-set for the market you trade
Pip, point and tick values differ by instrument. These calculators start from each one's contract, with worked examples:
Quick questions
What is margin level?
Equity divided by used margin, as a percentage.
What is the difference between margin call and stop-out?
A margin call is a warning that the margin level is low. Stop-out is the level at which the broker starts closing positions. Both levels are set by the broker.
What is a typical stop-out level?
Brokers differ; 50% is common but not universal. Check your account terms.
How do I lower my risk of a stop-out?
Hold less used margin for your balance: a smaller position or lower leverage.
Know the level before you size up.
These indicators help you mark levels.
Premium indicators come with a 7-day free trial on request: how the trial works.
Keep reading
Last updated November 2026. For education only. Not financial advice.